05-09
Mustang 4.6L GT - MBK Intake Kit
Part # 85-0601B / F1X25B
Click
for larger picture
Increase
horsepower and torque with this Cold Air Intake System.
You will not find a better deal on an Intake anywhere. This
is the best bang for you buck for a 05-09 GT Mustang Intake.
At these prices they will not last long !
$109.99 
Lowest
Intake price in this Industry
why pay more for the same overpriced part
All parts included with Filter
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang GT/V6 ROUSH Intake Kits
Click
for larger picture
Increase horsepower and torque with this Cold Air Intake System.
Lifetime High Flow filter element can be cleaned and re-oiled.
Easy installation with no drilling or cutting required. The
V8 system boasts a 4" roto-molded intake tube, larger
than any other intake on the market, that is mated to a lightweight
composite Cool Air Dam.
Features:
* Increase Horsepower and Torque
* Improve Fuel Mileage
* Easy Installation
* No PCM Calibration Required
* Lifetime Reusable Air Filter Element
$316.95
GT Mustang
$316.95 V6
Mustang
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang 4.6L GT - Bomez Intake Kit - RED
Click
for larger picture
It
can increase 7-13 HP and 5-10 ft/lb of torque, Easy to install
and easy to fit with simple tools, No additional parts will
be needed for installation after you purchase this kit, T-306
Aluminum Chrome Finished / Silver Finished Intake pipe as
shown in the picture, High quality built Washable and Reusable
Air Filter as shown in the picture, All necessary mounting
hardware, vacuum hoses and reducers will be included like
shown in the picture, The intake comes with either Red or
Blue Rubber bands and elbows.
$129.99
BLOW OUT PRICE - OVERSTOCK
Lowest Intake price in this Industry why pay
more for the same overpriced part
All parts included with Filter
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang 4.6L GT - Bomez Intake Kit - Blue
Click
for larger picture
It
can increase 7-13 HP and 5-10 ft/lb of torque, Easy to install
and easy to fit with simple tools, No additional parts will
be needed for installation after you purchase this kit, T-306
Aluminum Chrome Finished / Silver Finished Intake pipe as
shown in the picture, High quality built Washable and Reusable
Air Filter as shown in the picture, All necessary mounting
hardware, vacuum hoses and reducers will be included like
shown in the picture, The
intake comes with either Red or Blue Rubber bands and elbows.
$129.99
BLOW OUT PRICE - OVERSTOCK
Lowest Intake price in this Industry why pay
more for the same overpriced part
All parts included with Filter
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang GT BBK 62mm Throttle Body
BBK
05-06 GT Mustang Twin 62mm Throttle Body! BBK has done it
again. This throttle body will work without any other modifications.
14-15 Rear Wheel HP can be gained with this simple bolt on!
*
Quick Bolt On
* 14-15 Rear Wheel HP!
* Easy Install
$279.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang GT/GT500 JBA Axle Back System
(Stainless Steel)
Click
for larger picture
When
Ford designed the new Mustang - they injected a lot of the
classic Mustang legend and style. The factory Mustang sound
system uses 2-1/2" tubing that flows reasonably well
but the mufflers choke up the performance with back pressure
because they are designed to quiet the car. JBA has the solution
with an easy to install axle-back exhaust system with the
true "DNA" sound of a Mustang. It features JBA's
fully welded chamber style mufflers and chrome plated stainless
steel tips. Hangers are pre welded in place to use the factory
mounts. With a slip fit connection - this system can be installed
in less than 1 hour. Get the power, sound and quality you
need with a JBA performance exhaust!
$314.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang GT/GT500 2.5" to 3" Stainless
Steel Cat-Back Exhaust System
Click
for larger picture
#
Over-axle pipes w/2-1/2 to 3.0 diameter mandrel bent tubing
# 3.0 diameter Evol Axle-back mufflers
# 3.5"diameter stainless steel tips
$589.99
Shipping
Included in Price above
Lower 48 States
|
2005-09
Mustang GT SLP "Powerflo" Axle Back Exhaust Kit
w/ 4" Tips
Click
for larger picture
Give
your 2005-09 GT race-proven performance and a powerful deep
muscle-car sound to match, with a PowerFlo rear-axle back
exhaust system from SLP Performance Parts. This exhaust kit
includes a pair of our PowerFlo mufflers, which use a straight-through
design and ceramic-wrapped perforated core to significantly
outflow traditional chambered and turbo-type mufflers. Combined
with our all new 4" polished tips, you'll really feel
and hear the difference!
* PowerFlo Axle-Back Exhaust System features:
* PowerFlo mufflers offer minimal flow restriction and a deep,
rich performance sound
* Lighter than the OEM muffler assembly
* Installs in under 30 minutes
* Constructed entirely from 304 stainless steel
* Hand-polished mufflers and 4" dual-wall tips provide
a show quality appearance
* Emissions legal in all 50 states
* Includes pre-welded hangers, detailed instructions, and
all necessary installation hardware
* Covered by SLP's Performance Guarantee and limited *lifetime
warranty
$489.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang V6 4.0L JBA Dual Exit Exhaust conversion kit for V6
Includes Y-Pipe
Click
for larger picture
Every
Mustang owner craves the power and sound of a V8. JBA has
the solution for V6 Mustangs with easy to install exhaust
systems that deliver a powerful sound that won't be confused
with a sport compact. JBA's new dual exit exhaust system will
have you running with the V8's. This kit features JBA's fully
welded chamber style mufflers, high flow mandrel-bent tubing,
hangers and hardware and great looking 3" chrome plated
stainless steel tips. Get power, sound and quality with a
JBA performance exhaust!
$589.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang V6 4.0L JBA Axle Back
JBA'
s axle back exhaust is an affordable upgrade that delivers
a healthy rumble and opens up exhaust flow for more power.
The kit features JBA's fully welded chamber style muffler
and a great looking 3" chrome plated stainless steel
tip. Hangers are pre welded in place to use the factory mounts.
With a slip fit connection - this system can be installed
in less than 1 hour. Get the power, sound and quality you
need with a JBA performance exhaust!
$199.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang GT ROUSH Extreme Lowering Kit
Improve
handling on the track or on the street with these Roush extreme
lowering coil springs. Lowers the vehicle 1.25" to 1.50"
while maintaining ride quality.
$249.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang GT/V6 Eibach ProKit Lowing Springs
We
have a new 2005-2008 Mustang GT/V6 Eibach ProKit.
This kit is for Coupes and Convertibles.
GT Hard Top Eibach Pro-Kit Front 1.3" and the rear 1.4"
GT Convt. Top Eibach Pro-Kit Front 1.3" and the rear
1.5"
V6 Eibach Pro-Kit lowers Front 1.3" and the rear 1.5"
GT500 Eibach Pro-Kit Front 1.3" and the rear 1.4"
Eibach engineers their kits for high performance handling,
lower center of gravity all with a progressive rate spring
design that offers excellent ride quality.
$279.99
GT
$279.99
V6
$279.99
07-08 GT-500
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang GT C & L TrueFlow Intake Sys
Complete
intake assembly from the throttle body forward. Replaces factory
air inlet pipe, mass airflow housing and air filter assembly.
Comes with new cast aluminum inlet pipe, Aluminum CNC machined
MAF housing, conical air filter and filter shield assembly.
This system does not come with the Predator tuner. This kit
is recommended for customers that already have a Diablo Sport
Predator tuner. If you already have a Predator and purchase
this C&L kit, you can download the necessary program directly
from DiabloSport. The Predator tuner is necessary to correct
the air/fuel ratio when using the C&L TrueFlow intake
system on a 2005 Mustang GT.
$379.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang Trueflow Intake + Predator Tuner
2005
Mustang Trueflow ait intake and Predator Tuner combo, 20-30+
HP! C&L is pleased to announce ANOTHER FIRST for Mustang
enthusiasts. Owners of the cool new 2005 GT Mustang will love
the complete package that we have developed for these vehicles.
So much more than a "cold air" kit, this is a complete
system that truly addresses every aspect of improving the
air intake on the all-new Mustang. As a complete throttle-body
forward package, the entire factory air intake assembly is
replaced with all new components. While others will try to
sell a "cold air" package that consists of a cone
filter and an exhaust pipe tube based mass airflow housing,
only our package comes with an all-new (patent pending) cast
inlet pipe and a larger CNC machined aluminum mass airflow
housing. Also included in this package is a new high flow
conical filter assembly, custom filter shroud that separates
it from the engine compartment heat, MAF mounting bracket,
mounting hardware, installation tool and instructions. Dyno
testing the 2005 GT has shown that the computer is so sensitive
to airflow changes that a computer modification is necessary
in order to control the air/fuel ratio at the proper level.
Installing this air intake assembly on a 2005 GT without any
tuning will result in a leaner-than-ideal 14:1 air/fuel ratio.
While certainly not lean enough to cause engine durability
concerns, it is leaner than what is desired for optimum performance.
Even when replacing the air filter ONLY to a higher flow assembly,
the air/fuel ratio leans out at an alarming rate. This means
that any 2005 Mustang owner who is interested in modifying
their new car for better performance will have to use some
form of tuning, and we feel that we have found the best solution.
To make things as easy as possible for the end user, we have
worked closely with Diablosport to offer a simple computer
adjustment and tuning option for the 2005 Mustang GT. Available
with our new air intake assembly, we are providing a special
Diablosport Predator that comes pre-loaded with a specfic
tune for our air intake upgrade. With this tuner, you will
have the ability to not only make the adjustments necessary
for the new air inlet assembly, but also control the air/fuel
ratio and timing level based upon the octane quality of the
fuel that you are using. Most importantly, what also makes
this system superior to other options is that you have the
personal capability to make further adjustments in the future
to both your air/fuel and timing levels as you make other
changes to your vehicle. This means that any changes that
you make in the future can be easily compensated for using
the tuner without the need to rely on someone else to "re-flash"
your handheld tuner. This keeps you from having to rely on
others to make future adjustments, and puts YOU in control!
$699.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang BBK Cold Air Intake Kit
Our
all-new 2005 GT cold-air-induction kit was recently tested
and revealed a whopping 15 rear wheel horsepower increase
on our otherwise stock 2005 Mustang test vehicle. This system
features an all-new high-flow cast aluminum inlet plenum with
a built-in mass air meter as well as one of our popular high-flow
cotton element performance air filter.
$329.99
Titanium
Shipping
Included in Price above
Lower 48 States
|
05-09
Steeda High Velocity Cold Air Intake Kit
Gain
horsepower and torque with this straightforward upgrade. Lifetime
filter can be cleaned and re-oiled, but the big news here
is that we've streamlined the airflow in the 05 Mustang to
the point that a computer re-flash isn't just an option, it's
required! Check out our Tuners section for the diablosport
tuner that you need! The kit is supplied with a stainless
steel air box with built-in velocity stack and CNC billet
aluminum mass air meter. It mounts in the factory location
with the supplied rubber trim to seal it against the hood
& fender to keep the hot air out. The Steeda Lifetime
Filter can easily be cleaned and re-oiled, making maintenance
a snap. All hardware required for installation is included
in the kit.
$329.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang Diablosport Predator GT/V6
The
Predator for 2005 Mustang GT/V6 (part no. U7140) is a state-of-the
art, high performance tuning flash programmer in a sleek handheld
design. Once connected to the vehicle, the Predators internal
computer recognizes the vehicles PCM and automatically picks
the proper tuning files designed specifically for that PCM.
Inside the Predator's memory are the actual tuning files that
optimize spark timing and air/fuel ratio curves. The transmission
parameters are remapped to improve the shift characteristics
such as shift firmness and shift points. Unlike other 'tuners',
DiabloSport's programming is performed in very small increments
throughout the entire RPM range, for a smoother, wider and
a more predictable power delivery. DiabloSport engineers spend
many hours on the dyno, street and track to ensure the tunes
provided with the Predator are the best they can be. Due to
the new electronics and engine management system in the 2005
Mustang GT, tuning has become much more sensitive to the addition
of aftermarket parts such as cold air kits. Our 2005 Mustang
GT manufacturer specific calibrations are produced on our
in-house dyno on multiple vehicles under various conditions
and therefore the calibrations are explicitly made for that
specific manufacturer's cold air kit. DiabloSport will not
be held responsible for modified vehicles being run with out
calibrations specific to the application. Use of the standard
U7140 Mustang GT calibration on cold air intake modified vehicles,
or calibrations not specifically made for a cold air intake
kit manufacturer. These calibrations are designed for SPECIFIC
cold air systems and should not be used in conjunction with
any other manufacturers systems; failure to do so may result
in damage to your vehicle. The Predator was created with one
thing in mind, POWER! Average power gains are in the 15-20
RWHP range. The Predators additional power makes itself noticeable
immediately with an increase in power that starts in the low
RPMs and builds into a frenzy at the high RPMs. A Predator
equipped vehicle will notice significant improvements in drivability.
The additional power and improved shift patterns created by
the Predator tune will yield quicker acceleration and better
mileage, whether it is in town or out on the highway. The
power increase in the lower RPMs will yield a better throttle
response. The increase in MPG is a byproduct of maximized
engine efficiency, the improved timing curve and air/fuel
ratio creates a more complete combustion, i.e. the engine
extracts more power from each molecule of gasoline. DiabloSport
has generated all dyno tested tunes. The GT Predator comes
with the following 3 tunes: Performance Tune for 93 octane
Performance Tune for 91 octane Performance Tune for 87 octane
All the tunes including Factory HP(stock) are adjustable via
the adjustable parameters. Predator tunes re-map the: Fuel
Curves Timing Curves Extend Speed Limiters Extend Rev Limiters
DiabloSport Performance tunes require the use of Super Unleaded
/ Premium grade or 91 octane fuel only, like carried by Amoco/BP,
Sunoco or Mobil.
$369.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang S&B High Performance Intake
The S&B
intake kit has been designed to improve vehicle performance
while still utilizing OEM software and the Mustang's mass
air flow sensor. This enables the kit to be quickly and easily
installed.
The intake kit offers a special
eight-layer filter that has been designed to smooth the air
flow, allowing the MAF sensor to read evenly. The large volume
intake tube dramatically reduces restriction and improves
throttle response, enabling a significant horsepower gain.
Other
features of the new Mustang Intake kit:
* Custom-designed box to isolate
the filter from surrounding components
* Clear inspection lid to check the filter service cycle
* Billet-machined MAF sensor adapter plate, which also provides
a more secure fit superior to the plastic
pads used by various competitive manufacturers
* High quality cross-linked polyethylene intake tube and box
* Stainless steel hardware
$289.99
05-09 GT
$289.99
05-09 V6
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang Rear Honeycomb Panel
Silverhorse
2005-UP Mustang Honeycomb Rear Panel. Panel is made from the
highest-quality BASF plastic available specifically formulated
for automotive exterior applications. Installs in 5 minutes
with no tools, using the included alcohol prep pad. Fits V6,
GT, Coupe, Convertible, Roush, and Steeda Mustangs with no
modifications.
$179.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang 20PC Interior Kit
Superior
Dash Kits are the Finest Quality Available. Product is the
thinnest on the Market, .080 including 3M Backing, No adhesion
promoter needed.
Other dash kits use promoters, which make the dash unusable
if you ever decide to remove the trim. All pieces are applied
over the factory trim, no need to remove any parts for installation.
Click on picture for parts list and colors
for GT/V6 + Convertible
$219.99+
Over 40+ Colors to Choose from
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang Bilet Window Switch Plates
$59.99
Shipping
Included in Price above
Lower 48 States
|
2005-2007
Mustang Hood Quick Lift Plus Kit
Extremely
popular and sold world-wide! Redline Tuning hood QuickLIFTs
are designed to lift and hold your hood without the need for
the stock prop rod. This should be the first mod you do to
your vehicle! Includes only the best hardware along with a
detailed full-color installation manual for a quick and painless
installation.
$99.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang Intake Plenum Running Horse
$111.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang GT or V6 Bullitt Billet Fuel Door
$149.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Intake Plenum Horse Stars/Stripes
$189.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Intake Plenum Horse Flaming
$169.99
Shipping
Included in Price above
Lower 48 States
|
05-06
GT Niche Eight Hose Replacement Kit
Blue
$305.00
Shipping
Included in Price above
Lower 48 States
Now available, the Niche Performance
Industries silicone hose kit is a turn -key
product that is a direct OEM replacement for the
S197 Ford Mustang Aftermarket. Each kit comes
with a lifetime warranty.
- Easy to install with basic
tools
- Doesn't’t void warranty
- Offers vehicle personalization
- Available in many colors similar to OEM paint colors
- Product can with stand temp of over 200°F more
then stock
- Product can withstand over .20MPA20 MPa over stock.
- Appeals to race market and personalization market.
- This kit will not fit the V6. There will be a kit soon
- If you have a 07-08 GT please email us for kit details.
|
05-06
GT Niche Eight Hose Replacement Kit
Yellow
$305.00
Shipping
Included in Price above
Lower 48 States
Now available, the Niche Performance Industries silicone hose
kit is a turn -key product that is a direct OEM replacement
for the S197 Ford Mustang Aftermarket. Each kit comes with
a lifetime warranty.
- Easy to install with basic
tools
- Doesn't’t void warranty
- Offers vehicle personalization
- Available in many colors similar to OEM paint colors
- Product can with stand temp of over 200°F more
then stock
- Product can withstand over .20MPA20 MPa over stock.
- Appeals to race market and personalization market.
- This kit will not fit the V6. There will be a kit soon
- If you have a 07-08 GT please email us for kit details.
|
05-06
GT Niche Eight Hose Replacement Kit
Purple
$305.00
Shipping
Included in Price above
Lower 48 States
Now available, the Niche Performance
Industries silicone hose kit is a turn -key
product that is a direct OEM replacement for the
S197 Ford Mustang Aftermarket. Each kit comes
with a lifetime warranty.
- Easy to install with basic
tools
- Doesn't’t void warranty
- Offers vehicle personalization
- Available in many colors similar to OEM paint colors
- Product can with stand temp of over 200°F more
then stock
- Product can withstand over .20MPA20 MPa over stock.
- Appeals to race market and personalization market.
- This kit will not fit the V6. There will be a kit soon
- If you have a 07-08 GT please email us for kit details.
|
05-06
GT Niche Eight Hose Replacement Kit
Orange
$305.00
Shipping
Included in Price above
Lower 48 States
Now available, the Niche Performance Industries silicone hose
kit is a turn -key product that is a direct OEM replacement
for the S197 Ford Mustang Aftermarket. Each kit comes with
a lifetime warranty.
- Easy to install with basic
tools
- Doesn't’t void warranty
- Offers vehicle personalization
- Available in many colors similar to OEM paint colors
- Product can with stand temp of over 200°F more
then stock
- Product can withstand over .20MPA20 MPa over stock.
- Appeals to race market and personalization market.
- This kit will not fit the V6. There will be a kit soon
- If you have a 07-08 GT please email us for kit details.
|
05-06
GT Niche Eight Hose Replacement Kit
Red
$305.00
Shipping
Included in Price above
Lower 48 States
Now available, the Niche Performance
Industries silicone hose kit is a turn -key
product that is a direct OEM replacement for the
S197 Ford Mustang Aftermarket. Each kit comes
with a lifetime warranty.
- Easy to install with basic
tools
- Doesn't’t void warranty
- Offers vehicle personalization
- Available in many colors similar to OEM paint colors
- Product can with stand temp of over 200°F more
then stock
- Product can withstand over .20MPA20 MPa over stock.
- Appeals to race market and personalization market.
- This kit will not fit the V6. There will be a kit soon
- If you have a 07-08 GT please email us for kit details.
|
|
|
|
05-09
Xenon Mirror Cover - Paintable or Painted
These
covers are a stylish addition to any 2005-2009 Mustang and simply
slip over the stock mirrors after painting. They are secured
with 3M adhesive tape and one set screw at the bottom of the
cover. Sold in pairs only.
$119.99
Shipping
Included in Price above
Lower 48 States
-----------or------------
$339.99
PRE-painteD to Mustang COLORS
Pair
(Passenger and Drivers)
Free
Shipping
Color options
above in drop down box
NOTE - Allow for extra time on all painted parts
|
Xenon
Mirror Cover
|
05-09
Mustang DG Full Mirror Covers - Painted
   
Click for larger pictures
Not
a fan of the selection of ugly full mirror covers out there?
Your in Luck! Mr.Bodykit now offers a FULL Side Mirror cover
made of ABS molded Plastic. Held on with 3M Adhesive and COMES
PAINTED!!!! Why pay so much to have your mirrors painted and
have paint shops not being able to paint them the true color.
Why not cover them for less with these? These mirror covers
do not require prepping or painting. They are ready to install
right out of the box! Constructed from high impact, ABS plastic.
$159.99
PRE-painteD to Mustang COLORS
Pair
(Passenger and Drivers)
Free
Shipping
All
2005-2009 Mustang Colors Offered!
• ABS plastic molded.
• Easy 3M tape application.
• Insurance quality color-match workmanship (Exterior side of
louver is painted to match only. Louver side facing window is
raw black material)
• 7-14 working day turnaround time.
Color options above in drop down box
NOTE - Allow for extra time on all painted parts
|
05-09
Mustang DG Mirror Skull Caps
   
Click for larger pictures
Mr.Bodykit now offers a skull cap Mirror cover made of ABS molded
Plastic. Held on with 3M Adhesive and COMES PAINTED!!!! Why
pay so much to have your mirrors painted and have paint shops
not being able to paint them the true color. Why not cover them
for less with these? These mirror cap covers do not require
prepping or painting. They are ready to install right out of
the box! Constructed from high impact, ABS plastic.
$89.99
- Painted Skull CaP
PRE-painteD to Mustang COLORS
Pair
(Passenger and Drivers)
Free
Shipping
Color options above in drop down box
NOTE - Allow for extra time on all painted parts
--------------------------
|
05-09
Mustang DG Mirror Skull Cap - CHROME
Click
for larger pictures
Fits 2005-2009 Mustangs. Easy
installation. Pull off tape backing and stick them on. They
are ready to install right out of the box! Constructed from
high impact, ABS plastic.
$59.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang DG Mirror Skull Cap - Carbon Fiber
Click
for larger pictures
Fits 2005-2009 Mustangs. Easy
installation. Pull off tape backing and stick them on. They
are ready to install right out of the box! Constructed from
high impact, ABS plastic.
$79.99
Shipping
Included in Price above
Lower 48 States
|
2005-2010
MGP Caliper Cover Kit 4pc - Front and Rear
Click
for larger pictures
The new patented design of MGP
Caliper Covers for the 2005-2009 Ford Mustang. MGP has been
working the past four years to perfect and protect this product.
Made of 6061-T6 Aerospace Aluminum, the MGP Caliper Covers allow
any S197 Mustang to grab that "Big Brake" appearance
without that "Big Break" in the bank. Ingenious engineering
has brought forth a patented, easy installation process to this
exciting new product. NO GLUE and NO TAPE is used in this patented
fastening system - just your everyday, household wrench. The
MGP Caliper Covers will reduce not only the brake dust, but
the covers actually act as a heat shield which reduces the amount
of heat to your brakes by 25 to 50 degrees. Colors
in Red, Black or Satin Silver all powder coated for long lasting
finish. Fits only 17" to 22" wheels, will not work
on 15" or 16" wheels. Fits all S197 base and GT models
V6 and GT. Not for GT500.
$199.99
Select your color below
Shipping
Included in Price above
Lower 48 States
|
* Hydraulically Formed 6061-T6 Aluminum
* Easy Patented Fastening System
* 10 Minutes per Wheel for Installation
* TIG Welded
* 3 Different Options of Powdercoat Finish
* Big Brake Look
* Reduces Brake Dust and Heat
* Front and Rear Covers Can Also be Purchased Separately if
Desired by phone only 1866-610-2376
Click
here to see these Caliper Covers on Youtube Video
|
|
05-09
Mustang AH Rear Window Louver Kit
The
Astra Hammond rear window louver for the Ford 2005-09 Mustang. Made out
of textured hard ABS plastic material. Louvers can be painted for a custom
look but also can be install black. The louvers attach with
stainless steel hardware and are not hinged.
$399.99
Shipping
Included in Price above
Lower 48 States
|
05-09
Mustang Saleen Rear Window Louver Kit
Original
Saleen PJ/Heritage Rear Window Louvers. These rear window
louvers are made of Injection Molded TPO. This kit gives any
2005-09 mustang GT or V6 that throw back mustang look. These
come flat black, no painting needed on rear louvers..
$499.99
|
